The ERM Transfer option allows you to restore the original tune on the ECU, and pair the ERM with a new bike (either TPI or TBI with v2.2+ firmware).
Please note: If you intend to leave the bike with a TSP tune, or if you no longer have access to the original bike, it is necessary to purchase an ERM Reset.
After your purchase has been completed, you will receive an email containing a registration file and the below instructions on how to reset your ERM. Please contact us if you do not receive this email within 2 hours of purchase.
Instructions after receiving device reset email:
- Download the attached registration file on to your computer
- Connect the ERM to your computer using the supplied USB cable
- If your ERM is not running v2.2 firmware or newer, it must first be updated to at least v2.2 either by downloading the update from https://tsp-erm.com/firmware-updates or by updating directly from the ERM
- Load the attached registration file onto your ERM by connecting to it with ERM Manager, pressing the ‘Registration’ button on the left navigation pane, then pressing the ‘Upload Registration’ button and selecting the registration file downloaded in step 1.
- After this is complete, on the ERM go to the ‘Extras’ tab, press the ‘Device’ button, then press the ‘Transfer’ button on the ‘Activation’ page.
- Once the transfer is complete, it is ready to be set up again in the ERM portal as a new device.
- If you have purchased Pro/Pro+ Mode, it will remain on the ERM it was purchased on.