| Name | Price | | |
Pro Mode
When you purchase this unlock code, it will give you the ability to use the 'Pro' version which has the same limitations of 'Basic' tuning, but at a much higher resolution. This enables you to make much more precise changes to your mapping.
You can store up to a total of 5 profiles which can all be flashed as often as you want, and you can also copy any existing changes on the 'Basic' mapping into the 'Pro' section.
Each profile allows adjustment of parameters:
- Map 1 & 2 Fuel Maps
- Map 1 & 2 Ignition Maps
- Map 1 & 2 Oil Maps
- Map 1 & 2 Power Valve (TBI Models)
Pro Mode enables you to make the following changes:
- Fuel Maps: +/- 10% each cell
- Ignition Maps: -5° to +3° each cell
- Oil Maps: -50% to +100% each cell
Once purchasing Pro Mode, please view our guide in the 'instructions' section on how to go through this process, but a quick breakdown is:
- Upload a new updated registration file to your ERM
- Go to your bike that the ERM is paired to
- Once this is done, your ERM should have PRO mode unlocked in the 'extras' section
| $75AUD | Purchased |
Pro+ Mode
Pro+ Mode has the same features of Pro Mode, except the limitations have been changed to:
- Fuel Maps: No Restriction
- Ignition Maps: No Restriction
- Oil Maps: No Restriction
Once purchasing Pro+ Mode, please view our guide in the 'instructions' section on how to go through this process, but a quick breakdown is:
- Upload a new updated registration file to your ERM
- Go to your bike that the ERM is paired to
- Once this is done, your ERM should have PRO+ mode unlocked in the 'extras' section
If you have already purchased Pro mode, that will be discounted off the Pro+ mode price automatically. | $175AUD | Purchase |
ERM Reset
Resetting the ERM allows you to register the device with a new bike (either TPI or TBI with v2.0+ firmware)
The cost to reset your ERM is equivalent to the cost to reflash an individual ECU through one of our worldwide ECU reflash centres. Resetting allows you to leave your previous ECU with a TSP tuned map.
Please note: Once your ERM is paired to a new bike, you can no-longer use the ERM with the old bike. The ERM is designed to only pair with one bike at a time.
After your purchase has been completed, you will receive an email containing a registration file and the below instructions on how to reset your ERM. Please contact us if you do not receive this email within 2 hours of purchase.
Instructions after receiving device reset email:
- Download the attached registration file on to your computer
- Ensure your bike is running the tune that you want it to be left with, and disconnect the ERM from your bike.
- Connect the ERM to your computer using the supplied USB cable
- Load the attached registration file onto your ERM by connecting to it with ERM Manager, pressing the 'Registration' button on the left navigation pane, then pressing the 'Upload Registration' button and selecting the registration file downloaded in step 1.
- After this is complete, on the ERM go to the 'Extras' tab, then press the 'Reset' button on the 'Activation' page.
- Once the reset is complete, it is ready to be set up again in the ERM portal as a new device.
- If you have purchased Pro/Pro+ Mode, it will remain on the ERM it was purchased on.
| $350AUD | Purchase |
ERM Transfer
The ERM Transfer option allows you to restore the original tune on the ECU, and pair the ERM with a new bike (either TPI or TBI with v2.2+ firmware).
Please note: If you intend to leave the bike with a TSP tune, or if you no longer have access to the original bike, it is necessary to purchase an ERM Reset.
After your purchase has been completed, you will receive an email containing a registration file and the below instructions on how to reset your ERM. Please contact us if you do not receive this email within 2 hours of purchase.
Instructions after receiving device reset email:
- Download the attached registration file on to your computer
- Connect the ERM to your computer using the supplied USB cable
- If your ERM is not running v2.2 firmware or newer, it must first be updated to at least v2.2 either by downloading the update from https://tsp-erm.com/firmware-updates or by updating directly from the ERM
- Load the attached registration file onto your ERM by connecting to it with ERM Manager, pressing the 'Registration' button on the left navigation pane, then pressing the 'Upload Registration' button and selecting the registration file downloaded in step 1.
- After this is complete, on the ERM go to the 'Extras' tab, press the 'Device' button, then press the 'Transfer' button on the 'Activation' page.
- Once the transfer is complete, it is ready to be set up again in the ERM portal as a new device.
- If you have purchased Pro/Pro+ Mode, it will remain on the ERM it was purchased on.
| $150AUD | Purchase |
